NorabNorab - stop-it repair tape to repair pipes
line


FIX STIX 20-minute Epoxy

Fix Stix 20 Minute Epoxy

No hot work or special tools are required with FIX STIX™ - it's ready to use. This simple, easy to use epoxy stick will stop leaks, fill holes and cracks fast. FIX STIX™ sets rock hard in abaout 20 minutes, works underwater and in a wide temperature range. FIX STIX™ is pre-measured, non-toxic, solvent free, has little odour, can be used on potable water lines and has excellent chemical resistance. It will not shrink, crack or pull away. FIX STIX™ can be machined, threaded and painted after fully curing.

Fix Stix sealing up a leak in a pipe
Fix Stix sealing up a leak in a pipe
Fix Stix sealing up a leak in a pipe
Fix Stix sealing up a leak in a pipe
Fix Stix sealing up a leak in a pipe

FIX STIX™ is also included in the STOP IT® Pipe Repair System. Using STOP IT® Repair Tape in combination with FIX STIX™ greatly increases repair capacity. One person, with no special tools and no hot work can apply this quick in-field repair system in minutes.

 

FIX STIX ™ - Technical Information

 

Fix Stix

Working time: 2 minutes

Set time: 20 minutes

Maximum use temperature: 300°F (149°C)
Dielectric strength: 300 volts/mil at 0.15cm
Volume resistivity: 1 x 1012ohm/cm
Density: 18.5 lb/gal (22gm/cm)
Compression strength: 12,000 psi
Tensile strength: 6,000 psi
Modulus of elasticity: 6 x 10 psi
Lap shear strength (steel): 900 psi

Izod impact: 0.3 lb/in (notched)

Hardness (shore D): 80

USDA: Acceptable for use in federally inspected meat and poultry plants

Chemical resistance: Resistant to hydrocarbons, ketones, alcohols, esters, halocarbons, aqueous salt solutions and dilute acids and bases.

 

Fix Stix
Fix Stix
Fix Stix
Fix Stix
Fix Stix fills holes, cracks and voids and repairs threads and broken parts

 



Click here for the FIX STIX Chemical Compatibility Guide.

 

Click here for FIX STIX Materials Health, Safety and Environmental Sheet

 

Contact us to purchase FIX STIX 20 minute Epoxy or other products in the range.

 

 

 

 

 

 

 

 

 

 


Norab Services Limited - Your Source for InduMar Products
UK Toll Free Tel: (0)800 092 0725 | e-mail: info@norab.eu
line